User`s guide

DES-3226S Layer 2 Switch CLI Reference
189
show link_aggregation
Purpose Used to display the current link aggregation
configuration on the switch.
Syntax
show link_aggregation {group_id
<value>|algorithm}
Description This command will display the current link
aggregation configuration of the switch.
Parameters
<value> − Specifies the group id. The switch
allows up to 6 link aggregation groups to be
configured. The group number identifies each of
the groups.
algorithm − Allows you to specify the display of
link aggregation by the algorithm in use by that
group.
Restrictions None.
Example usage:
To display Link Aggregation configuration
DES-3226S:4#show link_aggregation
Command: show link_aggregation
Link Aggregation Algorithm = MAC-source-dest
Group ID : 1
Master Port : 2:17
Member Port : 1:5-1:10,2:17
Status : Disabled
Flooding Port : 1:5