User`s guide

DES-3226S Layer 2 Switch CLI Reference
179
show gvrp
Purpose Used to display the GVRP status for a port list
on the switch.
Syntax
show gvrp {<portlist>}
Description This command displays the GVRP status for a
port list on the switch
Parameters
<portlist> − Specifies a range of ports for which
the GVRP status is to be displayed. The port
list is specified by listing the lowest switch
number and the beginning port number on that
switch, separated by a colon. Then the highest
switch number, and the highest port number of
the range (also separated by a colon) are
specified. The beginning and end of the port list
range are separated by a dash. For example,
1:3 specifies switch number 1, port 3. 2:4
specifies switch number 2, port 4. 1:3-2:4
specifies all of the ports between switch 1, port
3 and switch 2, port 4 − in numerical order.
Restrictions None.