User`s guide

DES-3226S Layer 2 Switch CLI Reference
12
3
COMMAND SYNTAX
The following symbols are used to describe how command entries are made
and values and arguments are specified in this manual. The online help
contained in the CLI and available through the console interface uses the same
syntax.
Note: All commands are case-sensitive. Be sure
to disable Caps Lock or any other unwanted
function that changes text case.
<angle brackets>
Purpose Encloses a variable or value that must be
specified.
Syntax
create ipif <ipif_name> vlan <vlan_name 32>
ipaddress <network_address>
Description In the above syntax example, you must supply
an IP interface name in the <ipif_name> space,
a VLAN name in the <vlan_name 32> space,
and the network address in the
<network_address> space. Do not type the
angle brackets.
Example
Command
create ipif Engineering vlan Design
ipaddress 10.24.22.5/255.0.0.0