User`s guide

DES-3226S Layer 2 Switch CLI Reference
169
create vlan
Purpose Used to create a VLAN on the switch.
Syntax
create vlan <vlan_name 32> {tag <vlanid 1-
4094>|advertisement}
Description This command allows you to create a VLAN on
the switch.
Parameters
<vlan_name 32> − The name of the VLAN to be
created.
<vlanid> − The VLAN ID of the VLAN to be
created. Allowed values = 1-4094
advertisement − Specifies that the VLAN is able
to join GVRP. If this parameter is not set, the
VLAN cannot be configured to have forbidden
ports.
Restrictions Each VLAN name can be up to 32 characters.
If the VLAN is not given a tag, it will be a port-
based VLAN. Only administrator-level users
can issue this command.
Example usage:
To create a VLAN v1, tag 2:
DES-3226S:4#create vlan v1 tag 2
Command: create vlan v1 tag 2
Success.
DES-3226S:4#