User`s guide

DES-3226S Layer 2 Switch CLI Reference
168
16
VLAN COMMANDS
The VLAN commands in the Command Line Interface (CLI) are listed (along
with the appropriate parameters) in the following table.
Command Parameters
create vlan <vlan_name 32>
tag <vlanid>
advertisement
delete vlan <vlan_name 32>
config vlan <vlan_name 32>
add [tagged|untagged|forbidden]
delete
<portlist>
advertisement [enable|disable]
config vlan <vlan_name 32>
delete <portlist>
config vlan <vlan_name 32>
config gvrp <portlist>
all
state [enable|disable]
ingress_checking [enable|disable]
acceptable_frame [tagged_only|accept_all]
enable gvrp
disable gvrp
show vlan <vlan_name 32>
show gvrp <portlist>
Each command is listed, in detail, in the following sections.