User`s guide

DES-3226S Layer 2 Switch CLI Reference
152
Example usage:
To configure traffic scheduling:
DES-3226S:4# config scheduling 0 max_packet 100 max_latency
150
Command: config scheduling 0 max_packet 100 max_latency 150
Success.
DES-3226S:4#
show scheduling
Purpose Used to display the currently configured traffic
scheduling on the switch.
Syntax
show scheduling
Description
The show scheduling command displays the
current configuration for the maximum number
of packets (max_packets) and the maximum
latency (max_latency) values assigned to the
four priority queues on the switch. The switch’s
default max_latency = 0. At this value, it will
empty the four hardware queues in order, from
the highest priority (queue 3) to the lowest
priority (queue 0).
Parameters None.
Restrictions None.