User`s guide

DES-3226S Layer 2 Switch CLI Reference
146
config bandwidth_control
no_limit − Specifies that there will be no limit on
the rate of packets received by the above
specified ports.
<value 1-1000> − Specifies the packet limit, in
Mbps, that the above ports will be allowed to
receive. Gigabit ports must be configured to
using a limit value that is a multiple of 8 i.e. for
Gigabit ports <value 8-1000 in increments of 8>.
Restrictions Only administrator-level users can issue this
command.
Example usage:
To configure bandwidth control:
DES-3226S:4#config bandwidth_control 1-10 tx_rate 10
Command: config bandwidth_control 1-10 tx_rate 10
Success.
DES-3226S:4#