User`s guide

DES-3226S Layer 2 Switch CLI Reference
144
The commands in the Command Line Interface (CLI) are listed (along with the
appropriate parameters) in the following table.
Command Parameters
config
bandwidth_control
<portlist>
rx_rate
no_limit
<value 1-1000>
tx_rate
no_limit
<value 1-1000>
show
bandwidth_control
<portlist>
config scheduling <class_id 0-3>
max_packet <value 0-255>
max_latency <value 0-255>
show scheduling
config 802.1p
user_priority
<priority 0-7>
<class_id 0-3>
show 802.1p
user_priority
config 802.1p
default_priority
<portlist>
all
<priority 0-7>
show 802.1p
default_priority
<portlist>
Each command is listed, in detail, in the following sections.