User`s guide

DES-3226S Layer 2 Switch CLI Reference
134
show multicast_port_filtering_mode
Purpose Used to display the current multicast port
filtering mode.
Syntax show multicast port_filtering_mode {<portlist>}
Description This command is used to display the current
multicast port filtering settings.
Parameters
<portlist> − Specifies a range of ports to be
displayed. The port list is specified by listing the
lowest switch number and the beginning port
number on that switch, separated by a colon.
Then the highest switch number, and the
highest port number of the range (also
separated by a colon) are specified. The
beginning and end of the port list range are
separated by a dash. For example, 1:3 specifies
switch number 1, port 3. 2:4 specifies switch
number 2, port 4. 1:3-2:4 specifies all of the
ports between switch 1, port 3 and switch 2, port
4 − in numerical order.
If no ports are specified, the multicast port
filtering mode is listed for all ports.
Restrictions Only administrator-level users can issue this
command.