User`s guide

DES-3226S Layer 2 Switch CLI Reference
114
Example usage:
To configure STP with path cost 19, priority 15, and state enabled for
ports 1-5 of module 1.
DES-3226S:4#config stp ports 1:1-1:5 cost 19 priority 15 state
enabled
Command: config stp ports 1-5 cost 19 priority 15 state enabled
Success.
DES-3226S:4#
enable stp
Purpose Used to globally enable STP on the switch.
Syntax enable stp
Description This command allows the Spanning Tree
Protocol to be globally enabled on the switch.
Parameters None.
Restrictions Only administrator-level users can issue this
command.