User`s guide

DES-3226S Layer 2 Switch CLI Reference
6
You can also access the same functions over a Telnet interface. Once you have
set an IP address for your Switch, you can use a Telnet program (in VT-100
compatible terminal mode) to access and control the Switch. All of the screens
are identical, whether accessed from the console port or from a Telnet
interface.
After the switch reboots and you have logged in, the console looks like this:
Figure 2-1. Console Screen after login
Commands are entered at the command prompt, DES-3226S:4#.
There are a number of helpful features included in the CLI. Entering the ?
command will display a list of all of the top-level commands.