User`s guide

DES-3226S Layer 2 Switch CLI Reference
109
11
SPANNING TREE COMMANDS
The switch supports 802.1d STP and 802.1w Rapid STP. The spanning tree
commands in the Command Line Interface (CLI) are listed (along with the
appropriate parameters) in the following table.
Command Parameters
config stp maxage <value>
hellotime <value>
forwarddelay <value>
priority <value>
fdpdu [enable|disable]
txholdcount <1-10>
version [rstp|stp]
config stp ports <portlist>
cost <value>
priority <value>
migrate [yes|no]
edge [true|false]
p2p [true|false|auto]
state [enable|disable]
enable stp
disable stp
show stp
show stp ports <portlist>
Each command is listed, in detail, in the following sections.