User`s guide

DES-3226S Layer 2 Switch CLI Reference
107
delete syslog host
Purpose Used to remove a syslog host, that has been
previously configured, from the switch.
Syntax
delete syslog host [<index 1-4>|all]
Description
The delete syslog host command is used to
remove a syslog host that has been previously
configured from the switch.
Parameters
<index 1-4> − Specifies that the command will
be applied to an index of hosts. There are four
available indexes, numbered 1 through 4.
all − Specifies that the command will be applied
to all hosts.
Restrictions Only administrator-level users can issue this
command.
Example usage:
To delete a previously configured syslog host:
DES-3226S:4#delete syslog host 4
Command: delete syslog host 4
Success.
DES-3226S:4#