User`s guide
DES-3226S Layer 2 Switch CLI Reference
105
12 NTP subsystem
13 log audit
14 log alert
15 clock daemon
16 local use 0 (local0)
17 local use 1 (local1)
18 local use 2 (local2)
19 local use 3 (local3)
20 local use 4 (local4)
21 local use 5 (local5)
22 local use 6 (local6)
23 local use 7 (local7)
local0 − Specifies that local use 0 messages will
be sent to the remote host. This corresponds to
number 16 from the list above.
local1 − Specifies that local use 1 messages will
be sent to the remote host. This corresponds to
number 17 from the list above.
local2 − Specifies that local use 2 messages will
be sent to the remote host. This corresponds to
number 18 from the list above.
local3 − Specifies that local use 3 messages will
be sent to the remote host. This corresponds to
number 19 from the list above.
local4 − Specifies that local use 4 messages will
be sent to the remote host. This corresponds to
number 20 from the list above.
local5 − Specifies that local use 5 messages will
be sent to the remote host. This corresponds to
number 21 from the list above.