User`s guide

DES-3226S Layer 2 Switch CLI Reference
100
create syslog host
informational − Specifies that informational
messages will be sent to the remote host. This
corresponds to number 6 from the list above.
warning − Specifies that warning messages will
be sent to the remote host. This corresponds to
number 4 from the list above.
all − Specifies that all of the currently supported
syslog messages that are generated by the
switch will be sent to the remote host.
facility − Some of the operating system
daemons and processes have been assigned
Facility values. Processes and daemons that
have not been explicitly assigned a Facility may
use any of the"local use" facilities or they may
use the "user-level" Facility. Those Facilities that
have been designated are shown in the
following: Bold font indicates the facility values
that the switch currently supports.
Numerical Facility
Code
0 kernel messages
1 user-level messages
2 mail system
3 system daemons
4 security|authorization messages
5 messages generated internally by
syslog
6 line printer subsystem
7 network news subsystem
8 UUCP subsystem
9 clock daemon