User`s guide

DES-3226S Layer 2 Switch CLI Reference
4
The IP interface named System on the switch can be assigned an IP address
and subnet mask which can then be used to connect a management station to
the switch’s Telnet or Web-based management agent.
Figure 1-3. Assigning an IP Address
In the above example, the switch was assigned an IP address of 10.41.44.2
with a subnet mask of 255.0.0.0. The system message Success indicates that
the command was executed successfully. The switch can now be configured
and managed via Telnet and the CLI or via the Web-based management agent
using the above IP address to connect to the switch.