User`s guide

DGS-3224TG Gigabit Ethernet Switch User’s Guide
Figure 7-28. Rx Packets Analysis window (Table)
The information is described as follows:
• Time Interval – Select the desired setting between 1s and 60s, where “s” stands for seconds.
The default value is one second.
• Record Number – Select number of times the switch will be polled between 20 and 200. The
default value is 20.
• Bytes – Counts the number of bytes received on the port.
• Packets – Counts the number of packets received on the port.
• Show/Hide – Check whether or not to display Bytes and Packets.
• Clear – Clicking this button clears all statistics counters on this window.
• View Table – Clicking this button instructs the switch to display a table rather than a line
graph.
• View Line Chart – Clicking this button instructs the switch to display a line graph rather than a
table.
104