D-Link ™ DGE-530T 32-bit Gigabit Network Adapter Manual Version B1 (August2005) 6DGE530T..
Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited Warranty: • Only to the person or entity that originally purchased the product from D-Link or its authorized reseller or distributor, and • Only for products purchased and delivered within the fifty states of the United States, the District of Columbia, U.S. Possessions or Protectorates, U.S. Military Installations, or addresses with an APO or FPO.
• After an RMA number is issued, the defective product must be packaged securely in the original or other suitable shipping package to ensure that it will not be damaged in transit, and the RMA number must be prominently marked on the outside of the package. Do not include any manuals or accessories in the shipping package. D-Link will only replace the defective portion of the product and will not ship back any accessories. • The customer is responsible for all in-bound shipping charges to D-Link.
Limitation of Liability: TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, FAILURE OF OTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH D-LINK’S PRODUCT
Product Registration Register online your D-Link product at http://support.dlink.com/register/ Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights.
Table of Contents INTRODUCTION................................................................................................................................................1 System Requirements ........................................................................................................................................1 Features .............................................................................................................................................................
DGE-530T Gigabit Ethernet Adapter Card 1 Introduction Thank you for choosing the D-Link DGE-530T, the value leader among Gigabit adapters for PCI Bus personal computers. This introduction gives a general description of the newer networking technologies found on the DGE-530T. The DGE-530T provides the bandwidth capability to support high-end servers and workstations.
DGE-530T Gigabit Ethernet Adapter Card • Full-duplex Gigabit Ethernet interface that delivers 2Gbps aggregate bandwidth • Supports half and full duplex at 10Mbps, half and full-duplex at 100Mbps, and full-duplex operation at 1000Mbps • Supports for full-duplex double network throughput • Supports TCP/IP checksum generation and verification • Supports SNMP V1 • Supports 802.3x flow control • Supports 802.1Q VLAN • Supports 802.
DGE-530T Gigabit Ethernet Adapter Card 2 Installation Unpack and Inspect CAUTION: Under ordinary circumstances, a DGE-530T card will not be affected by a static charge that may be received through your body during handling of the unit. In special circumstances, the user may carry an extraordinarily high static charge and it is good practice to reduce the charge by touching a ground before handling the adapter card. Open the shipping carton and carefully remove all items.
DGE-530T Gigabit Ethernet Adapter Card Software Installation The CD-ROM included with your DGE-530T is designed to make installation of necessary software a painless and trouble-free process. Simply click on the “Install Driver” button, and an Installation Wizard will guide you through the process, no matter which operating system you’re running. The included Adobe Acrobat Reader, which is needed to read or print out your user manual, will also come in handy for many other applications.
DGE-530T Gigabit Ethernet Adapter Card 3 Advanced Features Wake On LAN This Wake-on-LAN function can wake up the system from the sleeping mode to the fully powered mode over the network immediately and automatically. Once the system is awake, it can be directed to run management utilities. This function increases end-user productivity by avoiding disruptions during working hours. QoS The QoS function allows the DGE-530T to transmit and receive tagged frames, such as 802.1p priority tagged frames and 802.
DGE-530T Gigabit Ethernet Adapter Card The D-Link SNMP Agent Utility Included on the installation CD is a program for viewing and configuring the DGE-530T, known as the D-Link SNMP Agent Utility. This agent will allow the user to view error packets, set passwords and choose NIC card options on your computer. This tool is only for computers running Windows 2000 and Windows XP operating systems. Make sure that you have already clicked Install Driver on the introduction page and completed Installation Wizard.
DGE-530T Gigabit Ethernet Adapter Card Window will then prompt the user to choose an Ethernet card from a pull down list. After choosing the D-Link DGE-530T Gigabit Ethernet Adapter and clicking OK, the user will be prompted with another window to input some personal information. You may input this information now or to set this information later, simply click OK.
DGE-530T Gigabit Ethernet Adapter Card chapter. After clicking OK, the D-Link Ethernet Adapter icon, shown below, should appear in the bottom right hand tool bar of your computer screen. Double clicking the icon will open the Agent window, as shown below. The Configuration Tab has two fields. The first field, “The agent is for:”, allows the user to choose an Ethernet card to configure, from a pull down menu.
DGE-530T Gigabit Ethernet Adapter Card To adjust your personal settings, click the Personal button, which will open the following screen. The user may set the following fields. • Name: A name chosen to identify the user when configuring the DGE-530T. • Location: The user may identify the physical location of the computer where the Ethernet card is installed. • Contact: Information on how to contact the user, such as a telephone number or an e-mail address.
DGE-530T Gigabit Ethernet Adapter Card Enter a password into the space provided and click OK to set your new password. If no password is set by the user, the default password of “private” is used and may need to be entered to configure the D-Link SNMP Agent. NOTE: The default password for this utility is “private”. Clicking the About tab will show the current version of the adapter and the copyright information. SNMP SNMP is an acronym for Simple Network Management Protocol.
DGE-530T Gigabit Ethernet Adapter Card This utility should only be used by experienced network administrators. Additional software or services may need to be previously installed or configured prior to installation of the SNMP protocol. D-Link Network Control Installed automatically with the driver is the D-Link Network Control program, which may be opened from an icon appearing in the lower right hand taskbar of your browser, and on the Control Panel of your computer.
DGE-530T Gigabit Ethernet Adapter Card To test the diagnostic, first disconnect the cable from the remote end node so there is just an open cable connected to the DGE-530T. Click the appropriate adapter from the tree view above and then click the Start VCT button. The results which will appear in the table below will display the cable pairs, the status of the corresponding cable, the distance to the fault, and the status of the test.
DGE-530T Gigabit Ethernet Adapter Card 4 Troubleshooting If you experience any problems with the adapter, check to see: • that the appropriate driver is loaded; • that the proper grade of cable is employed for the network connection; • that the supporting hub is properly qualified for the application. The DGE-530T Adapter features four LED indicators: • Link/Activity – Steady green indicates good linkage between the DGE-530T and its supporting server or switch.
DGE-530T Gigabit Ethernet Adapter Card 5 Specifications EMC And Safety Certifications: • FCC Class B • CE Class B • BSMI Class B • C-Tick Host interface: 32-bit PCI Bus (Bus Master) I/O base address assigned by Plug and Play system Interrupt Number Assigned by Plug and Play system Physical Dimensions: 4.88 inches(L) x 2.17 inches (W) Environment: • • • • Storage: −25° to 55°C (-13° to 131° F) Operating: 0° to 40° C (32° to 104° F) Humidity: 5% to 90% non-condensing Power Consumption: 3.
Model Name International Offices U.S.A 17595 Mt. Herrmann Street Fountain Valley, CA. 92708 TEL: 714-885-6000 Fax 866-743-4905 URL: www.dlink.com Canada 2180 Winston Park Drive Oakville, Ontario, L6H 5W1 Canada TEL: 1-905-8295033 FAX: 1-905-8295223 URL: www.dlink.ca Norway Karihaugveien 89 1086 Oslo Norway TEL: 47-23-897189 FAX: 47-22-309085 URL: www.dlink.no Finland Latokartanontie 7A FIN-00700 HELSINKI Finland TEL : +358-10 309 8840 FAX: +358-10 309 8841 URL: www.dlink.fi Europe (U. K.
