User`s guide

DGS-3100 Gigabit Ethernet Switch Manual
84
QOS scheduling_mechanism
CLASS ID Mechanism
-------------- -------------------
Class-0 strict
strict
Class-3 strict
Cla
Class-5 strict
Cla
Cla
DGS3100#
Class-1 strict
Class-2
ss-4 strict
ss-6 strict
ss-7 strict
config rate_limit
Purpose To enable rate limitation of specific egress ports.
Syntax
config rate_limit [<portlist> | all] [disable | <value 3500-
1000000>]
Description The command enables setting of rate limitation of config rate_limit
egress ports.
Parameters
sables rate limiting.
be
<portlist> − A port or range of ports to be set.
all − Specifies that all ports are to be configured.
disable − Di
<value 3500-1000000> The rate limit value. The value may
between 3500 and 1000000.
Restrictions None.
Example usage:
To configure a rate limit of eg
DGS3100 _limit 1:1
Success.
100
ress port 1:
# config rate
DGS3 #
show rate_limit
Purpose To show the rate limit of specific egress ports.
S
show rate_limit [<portlist> | all]
yntax
D show rate_limit command displays the rate limit of an egress
port.
escription The
Parameters <portlist> − A port or range of ports whose rate limit is to be
displayed.
all − Specifies that all ports are to be displayed.