User`s guide

DGS-3100 Gigabit Ethernet Switch Manual
62
pid Spanning Tree Protocol (RSTP) globally on
nning Tree Protocol (STP) globally on the Switch.
rstp – Sets the Ra
the Switch.
stp – Sets the Spa
Restrictions sers can issue this command. Only administrator-level u
Example usage:
To set the Switch g ltiple Spanning Tree Protocol (MSTP):
DGS3100# config stp version mstp
DGS3100
lobally for the Mu
Success.
#
enable stp
Purpose To globally enable STP on the Switch.
Syntax
enable stp
Description The enable stp command sets the Spanning Tree Protocol to be
globally enabled on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usa
To enable STP, globally, on the Switch:
ge:
DGS3100# enable stp
Success.
DGS3100#
disable stp
Purpose To globally disable STP on the Switch.
Syntax
disable stp
Description The disable stp command sets the Spanning Tree Protocol to be
globally disabled on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usa
To disabl
DGS3100
s.
100
ge:
e STP on the Switch:
# disable stp
Succes
DGS3 #