User`s guide

DGS-3100 Gigabit Ethernet Switch Manual
58
show syslog host
Purpose To display the syslog hosts currently configured on the Switch.
Syntax
show syslog host {<index 1-4>}
Description The show syslog host command displays the syslog hosts that are
currently configured on the Switch.
Parameters
1 to 4.
<index 1-4> − The syslog host index id. There are four available
indices, numbered
Restrictions None.
Example usage:
To show Syslog host informati
DGS31
Syslog
Host Id
----------
1
2 Local0 514
3
Total Entries : 3
on:
00# show syslog host
Global State: Disabled
Host IP address Severity Facility UDP port
------------------------ ------------- ------------- ---------------
10.1.1.2 All Local0 514
10.40.2.3 All
10.21.13.1 All Local0 514
DGS3100#