User`s guide

57
remote host. This corresponds to number 16 from the list above.
local1 − Specifies that local use 1 messages are to be sent to
remote host. This corresponds to number 17 from the list above.
local2 − Specifies tha
remote host. This corre
local4 − Specifies that local use 4 messages are to be sent to the
remote host. This corresponds to number 20 from the list above.
pecifies that local use 5 messages are to be sent to the
remote host. This corresponds to number 21 from the list above.
m the list above.
r 23 from the list above.
dp_port_number> − Specifies the UDP port number that
rotocol is to use to send messages to the remote host.
ipaddress <ipaddr> − Specifies the IP address of the remote host to
which syslog messages are to be sent.
state [enable | disable] − Allows the sending of syslog messages to
the remote host, specified above, to be enabled and disabled.
the
t local use 2 messages are to be sent to the
sponds to number 18 from the list above.
local3 − Specifies that local use 3 messages are to be sent to the
remote host. This corresponds to number 19 from the list above.
local5 − S
local6 − Specifies that local use 6 messages are to be sent to the
remote host. This corresponds to number 22 fro
local7 − Specifies that local use 7 messages are to be sent to the
remote host. This corresponds to numbe
udp_port <u
the syslog p
Restrictions Only administrator-level users can issue this command.
Example usa
og h
3100# config syslog host all severity all facility local0
Suc
DG
ge:
To configure a sysl ost:
DGS
cess.
S3100#
delete syslog host
Purpose To remove a previously configured syslog host from the Switch.
Syntax
delete syslog host [<index 1-4> | all]
Description The delete syslog host command removes a previously configured
syslog host from the Switch.
Parameters able <index 1-4> − The syslog host index id. There are four avail
indices, numbered 1 to 4.
all − Specifies that the command applies to all hosts.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete a previously configu
100
Success.
DGS3100
red syslog host:
DGS3 # delete syslog host 4
#