User`s guide

DGS-3100 Gigabit Ethernet Switch Manual
52
ver console , source 0.0.0. destination 0.0.0.0 TERMINATED. The Telnet/SSH se
ssion may still be connect
4 03-Jan-2000 17:26:24 Y
ssfully
5 03-Jan-2000 17:26:17
fig destination URL flash:/
6 03-Jan-2000 17:25:40
telnet , source 10.6.150.34
DGS3100#
0
ed.
%COP
-W-TRAP: The copy operation was completed succe
%COPY-I-FILECPY: Files Copy - source URL running-con
/startup-config
%AAA-I-CONNECT: User CLI session for user admin over
destination 10.6.41.37 ACCEPTED
enable syslog
Purpose nt to a remote host. To enable the system log to be se
Syntax
enable syslog
Description s the system log to be sent to a The enable syslog command enable
remote host.
Parameters None.
Restrictions e this command. Only administrator-level users can issu
Example usage:
To enable the syslog function
DGS3100
Success.
DGS3100
on the Switch:
# enable syslog
#
disable syslog
Purpose g sent to a remote host. To disable the system log from bein
Syntax
disable syslog
Description bles the system log from being The disable syslog command disa
sent to a remote host.
Parameters None.
Restrictions sue this command. Only administrator-level users can is
Example usage:
To disable the syslog function
DGS3100
Success.
DGS3100
on the Switch:
# disable syslog
#