User`s guide

47
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!
The copy o
!
3920460 by ]
DGS3100#
!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!01–Jan–2000 01:22:49 %COPY–W–TRAP:
peration was completed successfully
tes copied in 00:03:01 [hh:mm:ss
upload
Purpose itch settings to a TFTP server. To upload the current sw
Syntax
upload configuration <ipaddr> <path_filename 64> {startup |
running}
Description The upload command uploads the Switch’s current settings to a
TFTP server.
Parameters conf
uplo
iguration Specifies that the Switch’s current settings are to be
aded to the TFTP server.
P server
t as the Switch.
ation of the Switch configuration file on
dicates the Running Configuration file is to be uploaded.
<ipaddr> The IP address of the TFTP server. The TFT
must be on the same IP subne
<path_filename 64> The loc
the TFTP server. This file will be replaced by the uploaded file from
the Switch.
startup Indicates the Startup Configuration file is to be uploaded.
running In
Restrictions The TFTP server must be on the same IP subnet as the Switch.
Only administrator-level users can issue this command.
Exampl
To up
GS3100# upload configuration 1.1.1.23 1\running—config
6:11 %COPY–I–FILECPY: Files Copy – source URL running–config
was completed
e usage:
load a configuration file:
D
01–Jan–2000 01:2
destination URL tftp://1.1.1.23/1\running–config
..01–Jan–2000 01:26:16 %COPY–W–TRAP: The copy operation
success fully
!
158 bytes copied in 00:00:05 [hh:mm:ss]
DGS3100#