User`s guide

45
DGS3100# config snmp system_contact MIS Department II
Success.
DGS3100#
config snmp system_location
Purpose To enter a description of the location of the Switch.
Syntax
config snmp system_location <sw_location>
Description The config snmp system_location command enters a description
of the location of the Switch. A maximum of 255 characters can be
used.
Parameters <sw_location 0-255> - A maximum of 255 characters is allowed. A
NULL string is accepted if there is no location desired.
Restrictions Only administrator-level users can issue this command.
Example usa
To co ocation
DGS3100
s.
DGS3100
ge:
nfigure the Switch l for “HQ 5F”:
# config snmp system_location HQ 5F
Succes
#
config snmp system_name
Purpose To define the name for the Switch.
Syntax
config snmp system_name <sw_name>
Description The config snmp system_name command defines the name of the
h.
Switc
Parameters <sw_name 0-255> - A maximum of 255 cha
NULL string is accepted if no name is desir
racters is allowed. A
ed.
Restrictions Only administrator-level users can issue this command.
Example usa
To co h name as “DGS-3100 Switch”:
DGS3100# config snmp system_name DGS-3100 Switch
Success.
DGS-3100 Switch#
ge:
nfigure the Switc