User`s guide

DGS-3100 Gigabit Ethernet Switch Manual
44
Description The disable snmp authenticate trap command disables SN
authentication trap support on the Switch.
MP
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To disable the SNMP authentication trap support:
DGS3100# disable snmp authenticate trap
Success.
DGS3100#
show snmp traps
Purpose To display SNMP trap support status on the Switch.
Syntax
show snmp traps
Description The show snmp traps command displays the SNMP trap support
status currently configured on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To vi SNMP tra
DGS3100
SNMP Tr
Authentic
DGS3100
ew the current p support:
# show snmp traps
aps : enabled
ate Trap : enabled
#
config snmp system_contact
Purpose
r the Switch.
To enter identification information of a contact person who is
responsible fo
Syntax
config snmp system_contact <sw_contact>
Description The config snmp system_contact command enters the name
and/or other information to identify a contact person who is
responsible for the Switch. A maximum of 255 characters can be
used.
Parameters <sw_contact 0-255> - A maximum of 255 characters is allowed. A
NULL string is accepted if there is no contact.
Restrictions Only administrator-level users can issue this command.
Example usa
To co
ge:
nfigure the Switch contact to “MIS Department II”: