User`s guide

DGS-3100 Gigabit Ethernet Switch Manual
42
trusted_host command
Description The show trusted_host command displays a list of trusted hosts
entered on the Switch using the create
above.
Parameters <ipaddr> − The IP address of the trusted host.
Restrictions None.
Exampl
To display the list
GS3100# show trusted_host
t Stations
IP Address
---
Total Ent
100
e usage:
of trusted hosts:
D
Managemen
--------------------
10.48.74.121
ries: 1
DGS3 #
delete trusted_host
Purpose To delete a trusted host entry made using the create trusted_host
command above.
Syntax
delete trusted_host <ipaddr>
Description command deletes a trusted host entry
_host command above.
The delete trusted_host
made using the create trusted
Parameters <ipaddr> − The IP address of the trusted host.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete a trusted host with an IP address 10.48.74.121:
DGS3100# delete trusted_host 10.48.74.121
Success.
DGS3100
#
enable snmp traps
Purpose ble SNMP trap support. To ena
Syntax
enable snmp traps
Description NMP trap support on The enable snmp traps command enables S
the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.