User`s guide

41
SNMP agent.
Parameters <ipaddr> − The IP address of a remote SNMP manager that
enerated by the Switch’s SNMP agent.
receives SNMP traps g
Restrictions None.
Example usage:
To display the curr ed SNMP hosts on the Switch:
DGS3100# show snmp host
Host IP A SNMPv3 User Name
-------------- ------
10.48.76. private
0.48.74.
otal Ent
DGS3100#
ently configur
SNMP Host Table
ddress SNMP Version Community Name /
---- ----------------------------- -----------------
23 V2c
1 100 V3 public
T ries: 2
create trusted_host
Purpose create a trusted host. To
Syntax
create trusted_host <ipaddr>
Description The create trusted_host command creates a trusted host. The
y up to four IP addresses that are allowed
via in-band SNMP or TELNET based
se IP addresses must be members of the
pecified, then there is
ress from accessing the Switch,
name and Password.
Switch allows you to specif
to manage the Switch
management software. The
Management VLAN. If no IP addresses are s
nothing to prevent any IP add
provided the user knows the User
Parameters <ipaddr> − The IP address of the trusted host to be created.
Restrictions Only administrator-level users can issue this command.
Example usa
e trusted host:
d_host 10.48.74.121
ge:
To create th
DGS3100# create truste
Success.
DGS3100#
show trusted_host
Purpose To display a list of trusted hosts entered on
create trusted_host command above.
the Switch using the
Syntax
show trusted_host {<ipaddr>}