User`s guide

DGS-3100 Gigabit Ethernet Switch Manual
40
priv − Specifies that authorization is required, but there is no
and a remote SNMP
− Specifies that authorization is required, and that packets
sent between the Switch and a remote SNMP manger are
_string 24> − A string of up to 24 alphanumeric characters
uthorize a remote SNMP manager to access
the Switch’s SNMP agent.
encryption of packets sent between the Switch and a remote SNMP
manager.
auth_no
encryption of packets sent between the Switch
manager.
auth_priv
encrypted.
<auth
used in SNMP v3 to a
Restrictions Only ator-level users can issue this command. administr
Example usage:
To create an SNMP e SNMP messages:
host 10.48.74.100 v3 auth_priv public
host to receiv
DGS3100# create snmp
Success.
DGS3100#
delete snmp host
Purpose To remove a recipient of SNMP traps generated by the Switch’s
SNMP agent.
Syntax
delete snmp host <ipaddr>
Description The delete snmp host command deletes a recipient of SNMP traps
generated by the Switch’s SNMP agent.
Parameters <ipaddr> − The IP address of a remote S
receives SNMP traps generated by the Switch’s
NMP manager that
SNMP agent.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete an SNMP host entry:
DGS3100# delete snmp host 10.48.74.100
Success.
DGS3100#
show snmp host
Purpose To display the recipient of SNMP traps generated by the Switch’s
SNMP agent.
Syntax
host {<ipaddr>}
show snmp
Description The show snmp host command is used to display the IP addresses
ers that are
and configuration information of remote SNMP manag
designated as recipients of SNMP traps generated by the Switch’s