User`s guide

39
WriteView mmunityView
fy Vie
Security
y : NoAuthNoPriv
nityView
otify View Name : CommunityView
: SNMPv2
GS3100#
Name : Co
Noti w Name : CommunityView
Model : SNMPv1
Securit Level
Group Name : WriteGroup
ReadView Name : CommunityView
WriteView Name : Commu
N
Security Model
Security Level : NoAuthNoPriv
Total Entries: 10
D
create snmp host
Purpose To create a recipient of SNMP traps generated by the Switch’s
gent.
SNMP a
Syntax
create snmp host <ipaddr> [v1<community_string 20> |
0> | v3 [noauth_nopriv | auth_nopriv | v2c<community_string 2
auth_priv]<auth_string 24>]
Description The create snmp host command creates a recipient of SNMP traps
generated by the Switch’s SNMP agent.
Parameters
and control
SNMP v2c
anagement
strategies. It includes improvements in the Structure of Management
Information (SMI) and adds some security features.
n 3 is to be used. SNMP v3
s through a combination of
authentication and encrypting packets over the network. SNMP v3
s:
• Message integrity − ensures that packets have not been
tampered with during transit.
• Authentication − determines if an SNMP message is from a
valid source.
• ryption − scrambles the contents of messages to prevent
it being viewed by an unauthorized source.
ive remote SNMP managers
h’s SNMP agent.
noauth_nopriv − Specifies that there is no authorization and no
<ipaddr> − The IP address of the remote management station to
serve as the SNMP host for the Switch.
v1 – Specifies that SNMP version 1 is to be used. The Simple
Network Management Protocol (SNMP), version 1, is a network
management protocol that provides a means to monitor
network devices.
v2c – Specifies that SNMP version 2c is to be used. The
supports both centralized and distributed network m
v3 – Specifies that the SNMP versio
provides secure access to device
add
Enc
<community_string 20> − A string of up to 20 alphanumeric
characters that identifies members of an SNMP community. This
string is used like a password to g
access to MIB objects in the Switc