User`s guide

35
SNMP engine on the Switch.
Parameters default
device ma
− defines the automatically created engineID based on the
c.
between 10 and 64
identify the SNMP engine on
<snmp_engineID 10-64> − A string, of
alphanumeric characters, to be used to
the Switch.
Restrictions Only administrator-level users can issue this command.
Example usa
To give the SNMP agent on th
DGS3100 fig snmp engineID 0035636666
Success.
ge:
e Switch the name “0035636666”
# con
DGS3100#
show sn neID mp engi
Purpose To display the identification of the SNMP engine on the Switch.
Syntax
show snmp engineID
Description The sho
the SNM
w snmp engineID command displays the identification of
P engine on the Switch.
Parameters None.
Restrictions None.
Example usa
To di nt name o
DGS3100
5636666
DGS3100#
ge:
splay the curre f the SNMP engine on the Switch:
# show snmp engineID
SNMP Engine ID : 003
create snmp group
Purpose roup, or a table that maps SNMP users to To create a new SNMP g
SNMP views.
Syntax
oupname 30> [v1 | v2c | v3
nopriv | auth_priv]{notify_view
_view <view_name 30> | write_view
create snmp group <gr
[noauth_nopriv | auth_
<view_name 30>}] {read
<view_name 30>}
Description mand creates a new SNMP group, or
a table that maps SNMP users to SNMP views.
The create snmp group com
Parameters ame of up to 30 alphanumeric characters that
p the new SNMP user is to be associated
v1 – Specifies that SNMP version 1 is to be used. The Simple
<groupname 30> − A n
identifies the SNMP grou
with.