User`s guide

DGS-3100 Gigabit Ethernet Switch Manual
34
to MIB objects in the Switch’s SNMP agent.
characters that is used to identify members of an SNMP community
to delete. This string is used like a password to give remote SNMP
managers access
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete the SNMP commun
DGS3100
Success.
DGS3100#
ity string “dlink”:
# delete snmp community dlink
show snmp community
Purpose To display SNMP community strings configured on the Switch.
Syntax
p community {<community_string 20>}
show snm
Description The show snmp community command displays SNMP community
strings that are configured on the Switch.
Parameters <community_string 20> − A string of up to 20 alphanumeric
characters that is used to identify members of an SNMP community.
This string is used like a password to give remote SNMP managers
access to MIB objects in the Switch’s SNMP agent.
Restrictions None.
Example usage:
To display the currently entered SNMP
DGS3100
SNMP Comm i
Communit
-------------
priv
public
otal Ent
community strings:
# show snmp community
un ty Table
ame View Name Access Right
y N
------------------- -------------------------- ------------------------
dlink ReadView read write
ate CommunityView read write
CommunityView read only
T ries: 3
DGS3100#
config snmp engineID
Purpose ure a name for the SNMP engine on the Switch. To config
Syntax
nfig snmp engineID [default | <snmp_engineID 10-64>]
co
Description The config snmp engineID command configures a name for the