User`s guide

DGS-3100 Gigabit Ethernet Switch Manual
30
• <auth password 1-32> - A string of between 1 and
packets for the host.
tly 40 or 72
alphanumeric characters, in hex form, to define the
key used to authorize the agent to receive packets
level will be used.
32 alphanumeric characters used to authorize the
agent to receive
• <auth_key 40 or 72> - A string of exac
for the host.
Restrictions sue this command. Only administrator-level users can is
Example usage:
To create an SNMP Switch:
create snmp user dlink default encrypted by_password
th_password priv none
DGS3100
user on the
DGS3100#
auth md5 au
Success.
#
delete snmp user
Purpose group and also to delete
ociated SNMP group.
To remove an SNMP user from an SNMP
the ass
Syntax
delete snmp user <username 24>
Description The delete snmp user command removes an SNMP user from its
eletes the associated SNMP group.
SNMP group and then d
Parameters ng of up to 24 alphanumeric characters that
r to be deleted.
<username 24> − A stri
identifies the SNMP use
Restrictions command. Only administrator-level users can issue this
Example usage:
To delete a previously created SNMP user on the Switch:
DGS3100# delete snmp user dlink
Success.
DGS3100#
show snmp user
Purpose username in the SNMP To display information about each SNMP
group username table.
Syntax
show snmp user
Description The w snmp user command displays information about each
SNMP username in the SNMP group username table.
sho
Parameters ne. No
Restrictions Only administrator-level users can issue this command.