User`s guide

DGS-3100 Gigabit Ethernet Switch Manual
28
6
NAGEMENT (SNMP) NETWORK M C A OMMANDS
The Network Management commands in the Comm opriate
parameters) in the following table.
and Line Interface (CLI) are listed (along with the appr
Command Parameter
create snmp user
<groupname 30> [encrypted [by_password auth [md5
5
<username 24>
<auth_password 1-32> | sha <auth_password 1-32>] | by_key auth [md
<auth_key 32 or 64>| sha<auth_key 40 or 72>]]]
delete snmp user <username 24>
show snmp user
create snmp view <view_name 30> <oid> view_type [included | excluded]
delete snmp view ame 30> [all | oid] <view_n
show snmp view {<view_name 30>}
create snmp
communit
_string 20> view <view_name 30> [read_only | read_write]
y
<community
delete snm
community
<comm
p
unity_string 20>
show snmp community {<community_string 20>}
config snm [defaup engineID lt | <snmp_engineID 10-64>]
show snmp e ngineID
create snm
<grou | auth_nopriv |
auth_ me 30> |
write_
p group
pname 30> [v1 | v2c | v3 [noauth_nopriv
priv]{notify_view <view_name 30>}] {read_view <view_na
view <view_name 30>}
delete snmp group <groupname 30>
show snmp groups
create snmp host
<ipaddr> [v1<community_string 20> | v2c<community_string 20> | v3
_nopriv | auth_nopriv | auth_priv]<auth_string 24>]
[noauth
delete snmp host <ipaddr>
show snmp host } {<ipaddr>
create trus ted_host <ipaddr>
show trus ted_host {<ipaddr>}
delete tru <ipaddsted_host r>
enable sn mp traps
disable sn mp traps
enable snmp
authentica
te trap