User`s guide

DGS-3100 Gigabit Ethernet Switch Manual
20
Parameters <ipaddr> - The IP address of the host.
times <value 1-255> - The number of individual ICMP echo
to be sent. The maximum value is 255. The default is 0.
IP address without the times parameter will ping the
The time-out period while waiting for a
te device. A value of 1 to 99 seconds can be
messages
Pinging an
target device an infinite number of times.
timeout <sec 1-99> -
response from the remo
specified. The default is 1 second.
Restrictions None.
Example usa
To pi ss 10.6.15 e times:
DGS3100# ping 10.6.150.34 times 3
10.6.150.34 with 56 bytes of data:
6 bytes from 10.6.150.34: icmp_seq=1. time=0 ms
om 10.6.150.34: icmp_seq=2. time=0 ms
6 bytes from 10.6.150.34: icmp_seq=3. time=0 ms
----10.6.150.34 PING Statistics----
3 packets transmitted, 3 packets received, 0% packet loss
in/avg/max = 0/0/0
s.
100
ge:
ng the IP addre 0.34 thre
Pinging
5
56 bytes fr
5
round-trip (ms) m
Succes
DGS3 #
show cpu utilization
Purpose tion. To measure CPU utiliza
Syntax
show cpu utilization
Description lization command displays information about
CPU utilization.
The show cpu uti
Parameters None.
Restrictions None.
Example usage:
To show CPU utilization information:
DGS3100# show cpu utilization
CPU utilization service is on.
CPU utili
--------------
five seco
DGS3100
zation
--------
nds:2% ;one minute:1% ;five minutes:1%
#