User`s guide

19
DGS3100# reset
roceed with system reset?(y/n)
Success.
DGS3100
Are you sure to p
#
login
Purpose To log in a user to the Switch’s console.
Syntax
login
Description The login command initiates the login procedure. The user is
the Username and Password.
prompted for
Parameters None.
Restrictions None.
Example usa
To in e:
3100# login
UserName:
ge:
itiate the login procedur
DGS
logout
Purpose To log out a user from the Switch’s console.
Syntax
Logout
Description The logout command terminates the current user’s session on the
Switch’s console.
Parameters None.
Restrictions None.
Example usa
To te e current user’
100
ge:
rminate th s console session:
DGS3 # logout
ping
Purpose To test the connectivity between network devices.
Syntax
alue 1-255>} {timeout <sec 1-99>}
ping <ipaddr> {times <v
Description The ping command sends Internet Control Message Protocol
echo messages to a remote IP address. The remote IP
” or return the message. This is used to
confirm connectivity between the Switch and the remote device.
(ICMP)
address will then “echo