User`s guide

DGS-3100 Gigabit Ethernet Switch Manual
18
save
Purpose To save changes in the Switch’s configuration to non-volatile RAM.
Syntax
save
Description The save command saves the current switch configuration to non-
volatile RAM. The saved switch configuration will be loaded into the
Switch’s memory each time the Switch is restarted.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Exampl
To save the Switch M:
e usage:
’s current configuration to non-volatile RA
DGS3100# save
Saving all configurations to NV-RAM... Done.
DGS3100#
reboot
Purpose To restart the Switch. If the Switch is a member of a stack, it may be
rebooted individually, without affecting the other members of the
stack.
Syntax
reboot <box_id 1-6>
Description The reboot command restarts the Switch.
Parameters ox_id 1-6> − The unit’s current stack membership number. <b
Restrictions Only Administrator-level users can issue this command.
Example usage:
start the Switch unit 1: To re
DGS3100
DGS3100
# reboot 1
#
reset
Purpose To reset the Switch to the factory default settings.
Syntax
reset
Description The reset command restores the Switch’s configuration to the
d from the factory. Execution of the reset
the CLI retains the unit’s current stack
default settings assigne
command through
membership number.
Parameters None.
Restrictions Only ministrator-level users can issue this command. ad
Example usage:
To restore all of th eters to their default values: e Switch’s param