User`s guide

17
re you sure to delete the last administrator account?(y/n)
A
Success.
DGS3100#
enable web
Purpose To enable the HTTP-based management software on the Switch.
Syntax
enable web <tcp_port_number 1-65535>
Description The enable web command enables the Web-based management
software on the Switch. The user can specify the T
CP port number
tch will use to listen for Telnet requests.
the Swi
Parameters <tcp_port_number 1-65535> − The TCP port number. TCP ports are
numbered between 1 and 65535. The “well-known” port for the Web-
based management software is 80.
Restrictions Only administrator-level users can issue this command.
Example usage:
To enable HTTP a figure the TCP port number to listen for Telnet requests:
nable web 80
Success.
DGS3100#
nd con
DGS3100# e
disable web
Purpose P-based management software on the Switch. To disable the HTT
Syntax
disable web
Description The disable web command disables the Web-based management
software on the Switch.
Parameters None.
Restrictions Only inistrator-level users can issue this command. adm
Example usage:
To disable HTTP-based management software on the Switch:
DGS3100# disable web
Success.
100
DGS3 #