User`s guide

DGS-3100 Gigabit Ethernet Switch Manual
12
create account
Purpose To create user accounts.
Syntax
create account [admin | user] <username 15>
Description
The create account command creates an administrator or user
account that consists of a username and an optional password. Up
to 31 accounts can be created. The system prompts for the
account’s password, which may be between 0 and 15 characters.
Parameters admin creates an administrator account.
creates a user account.
me 1-15> The account username may be between 1 and
15 characters.
user
<userna
Restrictions Only Administrator-level users can issue this command.
Example usage:
To create an administrator-level user account with the username “dlink”:
ation:****
DGS3100# create account admin dlink
Enter a case-sensitive password:****
Enter the password again for confirm
Success.
DGS3100#
config account
Purpose ccount. To change the password for an existing user a
Syntax
ame 15>
config account <usern
Description mmand changes the password for a user
reated using the create account command.
the account’s new password, which may be
cters.
The config account co
account that has been c
The system prompts for
between 0 and 15 chara
Parameters sername. <username 1-15> the account u
Restrictions ly Administrator-level users can issue this command. On
Example usage:
To configure the user password of “dlink” account:
nfig account dlink
ensitive new password:****
Enter the **
s.
100
DGS3100# co
Enter a case-s
new password again for confirmation:**
Succes
DGS3 #
show account
Purpose n about all user accounts on the Switch. To display informatio