User`s guide

DGS-3100 Gigabit Ethernet Switch Manual
112
config guest_vlan ports
Purpose Defines a port or range of ports to be members of the Guest VLAN.
Syntax
config guest_vlan ports <portlist>
Description The config guest_vlan ports command defines a port or range of
ports to be members of the Guest VLAN. The Guest VLAN can be
be configured to provide limited network access to authorized
member ports. If a member port is denied network access via port-
based authorization, but the Guest VLAN is enabled, the member
port receives limited network access. For example, a network
administrator can use the Guest VLAN to deny internal network
access via port-based authentication, but grant Internet access to
unauthorized users.
Parameters portlist – A port or range of ports to be configured to the Guest
VLAN.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure ports to the Guest VLAN:
DGS3100# config guest_vlan ports 1
DGS3100#
show guest_vlan
Purpose Displays configuration information for the Guest VLAN.
Syntax
show guest_vlan
Description The show guest_vlan command displays the Guest VLAN name,
state, and member ports.
Parameters None.
Restrictions None.
Example usage:
To display the Guest VLAN configuration information:
DGS3100# show guest_vlan
Guest VLAN Table
Guest VLAN : Enable
Guest VLAN name : guestusers
Member : 1
DGS3100#