User`s guide

DGS-3100 Gigabit Ethernet Switch Manual
110
DGS3100# config radius delete 10.48.74.121
Success.
DGS3100#
config radius
Purpose To configure the Switch’s RADIUS settings.
Syntax
config radius <server_ip> {| key <passwd 32> | auth_port
<udp_port_number 1-65535> | acct_port <udp_port_number 1-
65535>}
Description The config radius command configures the Switch’s RADIUS
settings.
Parameters <server_ip> – The IP address of the RADIUS server.
key – Specifies that a password and encryption key are to be used
between the Switch and the RADIUS server.
• <passwd 32> – The shared-secret key used by the
RADIUS server and the Switch. Up to 32 characters can
be used.
auth_port <udp_port_number 1-65535> – The UDP port number for
authentication requests. The default is 1812.
acct_port <udp_port_number 1-65535> – The UDP port number for
accounting requests. The default is 1813.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure the RADIUS settings:
DGS3100# config radius 10.48.74.121 key dlink default
Success.
DGS3100#
show radius
Purpose To display the current RADIUS configurations on the Switch.
Syntax
show radius
Description The show radius command displays the current RADIUS
configurations on the Switch.
Parameters None.
Restrictions None.
Example usage:
To display RADIUS settings on the Switch: