User`s guide

105
ttings are to be
Parameters ports <portlist> − A port or range of ports whose se
displayed.
Restrictions Only administrator-level users can issue this command.
Example usage:
To display the 802.1x authent
DGS3100# sh 8
Port Auth PA
-------- ------ --
1 forceAu authorized
2 initialize
3
4
5
CTRL+C ESC q Quit SPACE n Next Page Enter Next Entry a All
ication states (stacking disabled) for Port-based 802.1x:
ow 02.1x auth_state ports 1:1-5
E State Backend State Port Status
---- ----------- --------------------- ----------------
th initialize
initialize authorized
initialize initialize authorized
initialize initialize authorized
forceAuth initialize authorized
show 802.1x auth_configuration
Purpose the To display the current configuration of the 802.1x server on
Switch.
Syntax
show 802.1x auth_configuration {ports <portlist>}
Description
ss
802.1x: Enabled/Disabled − Shows the current status of 802.1x
Authentication Mode: Port-based/Mac-based/None − Shows the
802.1x authorization mode.
ote/none − Shows the type of
d a
Port number − Shows the physical port number on the Switch.
AdminCrlDir: Both/In − Shows whether a controlled Port that is
unauthorized will exert control over communication in both receiving
and transmitting directions, or just the receiving direction.
OpenCrlDir: Both/In − Shows whether a controlled Port that is
orized will exert control over communication in both receiving
ransmitting directions, or just the receiving direction.
Shows the
atus. ForceAuth
Authorized.
(user) for all EAP packets, except for the Request/Identity
The show 802.1x auth_configuration command displays the
current configuration of the 802.1x Port-based Network Acce
Control server application on the Switch.
The following details are displayed:
functions on the Switch.
Authentication Method: Rem
authentication protocol suite in use between the Switch an
RADIUS server.
unauth
and t
Port Control: ForceAuth/ForceUnauth/Auto −
administrative control over the port’s authorization st
forces the Authenticator of the port to become
ForceUnauth forces the port to become Unauthorized.
QuietPeriod − Shows the time interval between authentication failure
and the start of a new authentication attempt.
TxPeriod − Shows the time to wait for a response from a supplicant
(user) to send EAP Request/Identity packets.
SuppTimeout − Shows the time to wait for a response from a
supplicant