User`s guide

DGS-3100 Gigabit Ethernet Switch Manual
104
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To enable 802.1x switch wide
DGS3100
Success.
100
:
# enable 802.1x
DGS3 #
disable 802.1x
Purpose n the Switch. To disable the 802.1x server o
Syntax
disable 802.1x
Description mand disables the 802.1x Port-based
Network Access control server application on the Switch.
The disable 802.1x com
Parameters None.
Restrictions tor-level users can issue this command. Only administra
Example usage:
To disable 802.1x on the Switch:
DGS3100# disable 802.1x
Success.
DGS3100#
show 802.1x auth_state
Purpose To display the current authentication state of the 802.1x server on the
Switch.
Syntax
show 802.1x auth_state {ports
<portlist>}
Description The show 802.1x auth_state command displays the current 802.1x
ng
nt
s /
hows the current state of the Backend Authenticator.
e
was
hat
authenticated, and cannot access the network.
authentication state of the specified ports of the Port-based Network
Access Control server application on the Switch.
The following details are displayed:
Port number − Shows the physical port number on the Switch.
Auth PAE State: Initialize / Disconnected / Connecting / Authenticati
/ Authenticated / Held / ForceAuth / ForceUnauth − Shows the curre
state of the Authenticator PAE.
Backend State: Request / Response / Fail / Idle / Initialize / Succes
Timeout − S
Port Status: Authorized / Unauthorized − Shows the result of th
authentication process. Authorized means that the user
authenticated, and can access the network. Unauthorized means t
the user was not