User`s guide

DGS-3100 Gigabit Ethernet Switch Manual
100
Success.
DGS3100#
disable igmp_snooping
Purpose To disable IGMP snooping on the Switch.
Syntax
disable igmp_snooping
Description The disable igmp_snooping command disables IGMP snooping on
the Switch. IGMP snoopi
ng can be disabled only if IP multicast
routing is not being used. Disabling IGMP snooping allows all IGMP
and IP multicast traffic to flood within a given IP interface.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
TTo nooping o itch:
DGS3100# disable igmp_snooping
disable IGMP s n the Sw
Success.
DGS3100#
show ig g mp_snoopin
Purpose To show the current status of IGMP snooping on the Switch.
Syntax
ow igmp_snooping {vlan <vlan_name 32>}
sh
Description The show igmp_snooping command displays the current IGMP
snooping configuration on the Switch.
Parameters <vlan_name 32> − The name of the VLAN for which IGMP snooping
configuration is to be displayed.
Restrictions None.
Example usage:
To show igmp snooping:
DGS3100# show igmp_snooping
IGMP Snooping Global State : Disabled
Multicast Filtering : Enabled
Vlan Name : default
Host Timeout : 260
Leaver Timer : 10
Route Timeout : 300
State : Disabled