User`s guide

95
S3100#
DG
show link_aggregation
Purpose To display the current link aggregation configuration on the Switch.
Syntax
up_id <value 1-32>}
show link_aggregation {gro
Description The show link_aggregation command displays the current link
aggregation configuration of the Switch.
Parameters group_id <value 1-32> − Specifies the group ID. The Switch allows
gation groups to be configured. The group
h of the groups.
up to 32 link aggre
number identifies eac
Restrictions None.
Example usage:
To display Link Ag
gation
ctive Port :
: Disabled
DGS3100#
gregation configuration:
DGS3100# show link_aggre
Group ID : 1
Member Port : 5-7,9
A
Status