Specifications

DES-3000 Series Layer 2 Switch CLI Reference Manual
enable snmp authenticate trap
Description This command is used to enable SNMP authentication trap
support on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To turn on SNMP authentication trap support:
DES-3026:4#enable snmp authenticate trap
Command: enable snmp authenticate trap
Success.
DES-3026:4#
disable snmp authenticate trap
Purpose Used to disable SNMP authentication trap support.
Syntax
disable snmp authenticate trap
Description This command is used to disable SNMP authentication support on
the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To disable the SNMP authentication trap support:
DES-3026:4#disable snmp authenticate trap
Command: disable snmp authenticate trap
Success.
DES-3026:4#
show snmp traps
Purpose Used to show SNMP trap support on the Switch .
Syntax
show snmp traps
Description This command is used to view the SNMP trap support status
currently configured on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To view the current SNMP trap support:
42