Specifications

DES-3000 Series Layer 2 Switch CLI Reference Manual
30
COMMAND HISTORY LIST
The command history list commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in
the following table.
Command Parameters
? {<command>}
show command_history
dir
config command_history <value 1-40>
Each command is listed, in detail, in the following sections.
?
Purpose Used to display all commands in the Command Line Interface (CLI).
Syntax
? {<command>}
Description This command will display all of the commands available through the
Command Line Interface (CLI).
Parameters <command> - Entering the question mark with an appropriate command
will list all the corresponding parameters for the specified command, along
with a brief description of the commands function and similar commands
having the same words in the command.
Restrictions None.
Example usage
To display all of the commands in the CLI:
DES-3026:4#?
Command: ?
..
?
clear
clear arptable
clear counters
clear fdb
clear log
clear port_security_entry port
config 802.1p default_priority
config 802.1p user_priority
config 802.1x auth_mode
config 802.1x auth_parameter ports
config 802.1x auth_protocol
config 802.1x capability ports
config 802.1x init
config address_binding ip_mac ipaddress
config 802.1x guest_vlan ports
config 802.1x reauth
config account
config address_binding ip_mac ports
config arp_aging time
config bandwidth_control
CTRL+C ESC q Quit SPACE n Next Page Enter Next Entry a All
Example usage:
180