Specifications

DES-3000 Series Layer 2 Switch CLI Reference Manual
show 802.1x auth_configuration
/ForceAuth/ForceUnauth − Shows the current state of the Authenticator PAE.
Backend State: Request/Response/Fail/Idle/Initialize − Shows the current state of the
Backend Authenticator.
ReAuthenticate: Enabled/Disabled − Shows whether or not to re-authenticate.
AdminCtlDir: Both/In − Shows whether a controlled Port that is unauthorized will exert control
over communication in both receiving and transmitting directions, or just the receiving
direction.
OpenCtlDir: Both/In − Shows whether a controlled Port that is unauthorized will exert control
over communication in both receiving and transmitting directions, or just the receiving
direction.
Port Control: ForceAuth/ForceUnauth/Auto − Shows the administrative control over the port’s
authorization status. ForceAuth forces the Authenticator of the port to become Authorized.
ForceUnauth forces the port to become Unauthorized.
QuietPeriod − Shows the time interval between authentication failure and the start of a new
authentication attempt.
TxPeriod − Shows the time to wait for a response from a supplicant (user) to send EAP
Request/Identity packets.
SuppTimeout − Shows the time to wait for a response from a supplicant (user) for all EAP
packets, except for the Request/Identity packets.
ServerTimeout − Shows the length of time to wait for a response from a RADIUS server.
MaxReq − Shows the maximum number of times to retry sending packets to the supplicant.
ReAuthPeriod − Shows the time interval between successive re-authentications.
Parameters
ports <portlist> − Specifies a port or range of ports to be viewed.
Restrictions Only administrator-level users can issue this command.
Example usage:
To display the 802.1x configurations:
DES-3026:4#show 802.1x auth_configuration ports 1
Command: show 802.1x auth_configuration ports 1
802.1X : Enabled
Authentication Mode : Port_based
Authentication Protocol : Radius_Eap
Port number : 1
Capability : None
AdminCrlDir : Both
OpenCrlDir : Both
Port Control : Auto
QuietPeriod : 60 sec
TxPeriod : 30 sec
SuppTimeout : 30 sec
ServerTimeout : 30 sec
MaxReq : 2 times
ReAuthPeriod : 3600 sec
ReAuthenticate : Disabled
146