User's Manual

13
Link Info
Using the Configuration Utility (continued)
After clicking on the Configuration Utility icon, the Link Info screen will display the
settings for the DWL-G650:
SSID:
The Service Set Identifier is the name
assigned to the wireless network.
The factory SSID setting is default.
Tx Rate:
Tx Rate settings are automatically determined for an optimal speed up to a maximum
of 54Mbps.
Status:
Displays the MAC address of the
access point or router to which the
DWL-G650 is associated.
Channel:
The channel selection is automatically determined by the DWL-G650.
Frequency:
802.11g indicates that the DWL-
G650 is communicating in the
2.4GHz band.
Encryption:
You can see if WEP (Wired Equivalent Privacy) is Enabled or Disabled here.
Wireless Mode:
Either Infrastructure or Ad-Hoc will be displayed here. (Please see the Getting
Started section in this manual for an explanation of these two modes.)
Signal Strength/Link Quality:
Packet Count:
Displays the statistics of the data packets that are transmitted and received.
Rescan Button:
Rescans for the strongest signal in your environment and associates with that access
point or router.
Displays the Link Quality for the DWL-G650 wireless connection to the access point.
The signal strength represents the wireless signal between the access point and the
DWL-G650. The percentage coincides with the graphical bar.
AirPlus Xtreme G Wireless Utility
802.11g
11