User's Manual

16
Using the Configuration Utility (continued)
Tools > Admin
New Password: Enter the
new password
Confirm Password:
Re-enter the password to
confirm it
Tools > System
Save Settings: The current
system settings can be saved
as a file onto the local hard
drive.
Load Settings: The saved
file or any other saved setting
file can be loaded back on the
Access Point. To reload a sys-
tem settings file, click on
Browse to browse the local
hard drive and locate the sys-
tem file to be used. Click Load
when you have selected the file
to be loaded back onto the Ac-
cess Point.
Restore: You may also reset the Access Point back to factory settings by clicking on
Restore. Make sure to save the unit’s settings before clicking on Restore.